Satinkeeper Resilient Low Gloss Floor Finish from Armstrong is for use on no-wax vinyl and linoleum low gloss floors. It protects and renews the appearance of dulled or older floors.

Satinkeeper Floor Finish is designed to maintain the original low-gloss appearance of no-wax vinyl or linoleum floors only. It restores gloss and protects worn or older floors even after repeated washings. use on higher gloss floors will result in an undesirable appearance.

Directions:
Sweep or vacuum floor thoroughly. Wash with Armstrong Once 'n Done Floor Cleaner (not recommended for linoleum floors), and then let dry. Initial use requires two coats to be applied --- allow time for each coat to dry. Apply with a clean, damp sponge mop or wax applicator. Make sure the entire surface is coated. Dries in about 30 minutes --- no buffing necessary.

Reapply polish as needed --- 1 or 2 coats at a time. If necessary, remove with Armstrong New Beginning Deep Cleaning Floor Stripper. In high humidity areas, Satinkeeper may take longer than 30 minutes to dry.